manualshive.com logo in svg

MIMAKI JV4-130, Maintenance Manual

Share
Download
MIMAKI JV4-130 Maintenance Manual Download Page 124

– 4.66 –

4-7.  Updating the firmware

This device permits updating of the firmware through the IEEE1394 interface or the IEEE1284

interface from the computer.  Use a specialized F/W downloader.

•

You may download F/W downloader from our Web site on the Internet.

(URL: http://www.mimaki.co.jp/)

4-7-1.  The firmware in this unit

This unit consists of the following 2 firmware components; the versions of both can be updated

through the interface.

Mechanical side firmware ........ This firmware controls the machine main unit. It is

downloaded onto the main PCB.

Interface side firmware ............. This firmware controls the interface with the host computer.

It is downloaded onto the IEEE1394.

4-7-2.  Main unit side firmware version updating file

The F/W version updating floppy disc issued by Development Division of MIMAKI contains

the following 2 files.

1. JV4.ROM ............................ This is the F/W version updating file.

2. FILECHK.EXE ................... This program checks for copying mistakes when the F/W

version updating file is copied to the floppy disc. Be sure to

check every time the file is copied.

You may download F/W version-up file through our Web site on the Internet (URL: http://

www.mimaki.co.jp/).  Download one of the following according to your use environment.

The “ 

∗∗∗

 

” in the file name indicates the version number of F/W.

1. JV4_

∗∗∗

L.EXE ................... Japanese version for WINDOWS

2. JV4_

∗∗∗

Z.EXE ................... English version for WINDOWS

3. JV4_

∗∗∗

.sea .hqx ................ Japanese/English shared version for MAC

Every file is a self-unarchiving compressed file.  When unarchived, the file is extracted to the

following five files.

1. JV4.ROM ............................ This is the F/W version updating file.

2. README.TXT ................... This is the version-updating manual in English.

3. READMEJ.TXT ................. This is the version-updating manual in Japanese.

Downloaded From ManualsPrinter.com Manuals

Summary of Contents for JV4-130











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands