- 15 -
When to use CuttingLink - Client?
CuttingLink - Server can register up to five plotters. As shown below, use Cutting - Client to connect more than 6
plotters.
How to set CuttingLink - Client
1. Install CuttingLink on the PC connecting 1st to 5th UCJV300/150, CJV300 Plus
series, and set it to CuttingLink - Server.(
P.5 "Install CuttingLink." or later)
2. Install CuttingLink on the PC connecting the sixth UCJV300/150, CJV300 Plus series
and set it to CuttingLink - Client.
(1) Install CuttingLink on the PC to which the plotter is connected and start it.
(2) On the [Initial Setting] screen, select [CuttingLink -
Client], and then click [OK].
RasterLink
Printer - Server PC1
Printer - Server PC2
Register
Register
Register
Reg
ister
