MIMAKI CJV30-100, Operating Manual

Page: 111 / 274

This chapter
describes the operation procedures for using the cutting function more conveniently and
each setting procedure.
Setting the Pinch Rollers ........................... 4-2
Recommended Setting for the Pinch Roller
Pressure and Number of Pinch Rollers ....... 4-2
Quantity of Pinch Rollers ............................. 4-2
Setting for the Pinch Rollers ........................ 4-3
Cutting out Data with Register Marks ....... 4-5
Flow of Cutting Data with Register Marks ... 4-5
Entering Register Mark Detection Mode ..... 4-5
Notes on Inputting Data with Register
Marks .......................................................... 4-6
Setting Register Mark Detection ............... 4-11
Method of Detecting Register Marks ......... 4-15
When Cutting Failed .................................. 4-17
Setting Automatic Cutting........................ 4-22
Dividing and Cutting................................. 4-23
Setting the Dividing and Cutting Function . 4-23
Cutting Data by Using the Dividing and
Cutting Function ........................................ 4-25
Cutting with a Dotted Line........................ 4-26
Changing the Order of Cutting ................ 4-28
Setting the SORTING ................................4-29
Procedure for SORTING ............................4-31
Other Settings ........................................... 4-32
Copying the setting contents................... 4-36
Initializing the Settings ............................. 4-37
Cutting Samples........................................ 4-38
Cutting a Medium into Multiple Pieces
with a Certain Length................................ 4-40
Perform Multiple Cuttings ........................ 4-42
Setting the step size ................................. 4-44
Other Convenient Functions.................... 4-45
Medium feeding .........................................4-45
Distance correction ....................................4-46
Chapter 4
Extended Functions – Cutting –