4-11
Cutting out Data with Register Marks
4
Ex
tended
Functions
– Cutting –
Setting Register Mark Detection
When you want to cut the data with register marks, set the following without fail.
1
Press the
key in LOCAL to select cutting
mode.
2
Press the
key.
3
Press the
key.
4
Press
to select a tool condition (CUT1 to CUT3, HALF, PEN) and press the
key.
5
Press
to select [MARK DETECT].
6
Press the
key.
7
Press
to select number of detected register marks.
•
Set values:
OFF, 1pt , 2ptX , 2ptY , 3pt , 4pt
8
Press the
key.
• In case you selected "OFF" in Step 8, proceed to Step 13.
9
Press
to select the following items, and then press the
key.
• The following items are provided for the register mark detection setting.
Mark detect, Register mark size, offset Y, offset X, form of register mark, number of continuous cutting in
direction Y, number of continuous cutting in direction X, high speed limi, and skew check
• See pages P.4-12 through P.4-14 for details of each set item.
10
Press
to select a set value.
• See pages P.4-12 through P.4-14 for set values for each set item.
11
Press the
key to enter the value.
12
Press the
key several times to return to LOCAL.
< LOCA L .
C
>
[ # 0 1 ]
CUT 1 ( 3 0 /
6 0 /
0 . 3 0 )
FUNCT I ON
C
SE TUP
< ENT >
SE TUP
SE L ECT
: CUT 1
[ CUT 1 ]
MARK DE T ECT
< e n t >
[ CUT 1 ] MARK DE T ECT
DE T ECT
:
OF F
Summary of Contents for CJV30-100
