Dividing and Cutting
4-25
4
Ex
tended
Functions
– Cutting –
Cutting Data by Using the Dividing and Cutting Function
1
Data is received from the computer.
• When data has jutted out from the cut area, a screen shown
right appears.
2
When cutting has been complete, the frame and marks for
pasting are automatically cut.
3
When the frame has been cut, the screen returns to
LOCAL.
• Do not replace a medium when this screen does not appear.
4
Set a new origin.
• Move the carriage using the jog keys and set an origin.
• When there is no space to be cut, replace the medium.
5
Press the
key to go to the remote mode.
• The medium is fed by the maximum medium length of the cut data and cut.
• When the medium is not fed or the length of the medium is short, replace the medium with a larger one in
Step 4.
6
Repeat the operations in Steps 4 and 5.
• Repeat the operations until there is no data that exceeds the width of
the medium.
• When the operations have been completed, tool conditions are displayed and the screen returns to
LOCAL.
• Cut does not start if new origin was not set in Step 4.
Effective area
Origin
* REMOT E .
C
* <
1 0 0 KB >
* * OF F SCA L E * *
* * D I V I S I ON * *
< LOCA L .
C
>
[ # 0 1 ]
* * D I V I S I ON * *
REMOTE
< LOCA L .
C
>
[ # 0 1 ]
[ CUT 1 ]
3 0
6 0
0 . 3 0
Summary of Contents for CJV30-100
