background image

8

9

Cleaning

Clean dust and debris from charger and tool 
vents. Keep tool handles clean, dry and free 
of oil or grease. Use only mild soap and a 
damp cloth to clean the tool, battery pack 
and charger since certain cleaning agents 
and solvents are harmful to plastics and other 
insulated parts. Some of these include gaso-
line, turpentine, lacquer thinner, paint thinner, 
chlorinated cleaning solvents, ammonia and 
household detergents containing ammonia. 
Never use fl ammable or combustible sol-
vents around tools.

 WARNING

To reduce the risk of injury, 
always unplug the charger and 
remove the battery pack from 
t h e   c h a r g e r   o r   t o o l   b e f o r e 
performing any maintenance. 
N e v e r   d i s a s s e m b l e   t h e   t o o l , 
battery pack or charger. Contact a 
MILWAUKEE
 service facility for ALL 
repairs.

Keep your tool, battery pack and char-
ger in good repair by adopting a regular 
maintenance program. After six months 
to one year, depending on use, return the
tool, battery pack and charger to a 

MILWAUKEE

 service facility for:

• Lubrication

• 

Mechanical inspection and cleaning 
(gears, spindles, bearings, housing, 
etc.)

• 

Electrical inspection (battery pack, 
charger, motor)

• 

Testing to assure proper mechanical and 
electrical operation

Maintaining Tool

If the tool does not start or operate at full pow-
er with a fully charged battery pack, clean 
the contacts on the battery pack. If the tool 
still does not work properly, return the tool, 
charger and battery pack, to a 

MILWAUKEE

 

service facility for repairs.

MAINTENANCE

 WARNING

To reduce the risk of personal injury 
and damage, never immerse your 
tool, battery pack or charger in liquid 
or allow a liquid to fl ow inside them. 

Repairs

For repairs, return the tool, battery pack and 
charger to the nearest service center listed on 
the back cover of this operator's manual.

ACCESSORIES

Always remove battery pack before 
changing or removing accessories. 
Only use accessories specifi cally 
recommended for this tool. Others 
may be hazardous.

WARNING

For a complete listing of accessories refer to 
your

 MILWAUKEE 

Electric Tool catalog or go 

on-line to www.milwaukeetool.com. To obtain 
a catalog, contact your local distributor or a 
service center listed on the back cover of this 
operator’s manual.

FIVE YEAR TOOL  LIMITED WARRANTY

Every 

MILWAUKEE

 electric power tool (including battery charger) is warranted to the original 

purchaser only to be free from defects in material and workmanship.  Subject to certain excep-
tions, 

MILWAUKEE

 will repair or replace any part on a electric power tool which, after examina-

tion, is determined by 

MILWAUKEE

 to be defective in material or workmanship for a period of 

fi ve (5) years* after the date of purchase.  Return the electric power tool and a copy of proof 
of purchase to a 

MILWAUKEE

 factory Service/Sales Support Branch location or 

MILWAUKEE 

Authorized Service Station, freight prepaid and insured, are requested for this warranty to be 
effective.  This warranty does not apply to damage that 

MILWAUKEE

 determines to be from 

repairs made or attempted by anyone other than 

MILWAUKEE

 authorized personnel, misuse, 

alterations, abuse, normal wear and tear, lack of maintenance, or accidents.

* The warranty period for Hoists (lever, hand chain, & electric chain hoists), all Ni-CD battery 
packs, Work Lights (cordless fl ashlights), Job Site Radios, and Trade Titan™ Industrial Work 
Carts is one (1) year from the date of purchase.  *The warranty period for Li-Ion battery packs 
that do not contain V™-technology – 4.0 volts through 18.0 volts - is two (2) years from the 
date of purchase.

*There is a separate warranty for V™-technology Li-Ion Battery Packs V™18 volts and above 
that accompany V™-technology cordless power tools:

*Every MILWAUKEE V™-technology Li-Ion Battery Pack 18 volts or above is covered by an 
initial 1000 Charges/2 Years free replacement warranty.  This means that for the earlier of 
the fi rst 1000 charges or two (2) years from the date of purchase/fi rst charge, a replacement 
battery will be provided to the customer for any defective battery free of charge.  Thereafter, 
customers will also receive an additional warranty on a pro rata basis up to the earlier of the 
fi rst 2000 charges or fi ve (5) Years from the date of purchase/fi rst charge.  This means that 
every customer gets an additional 1000 charges or three (3) years of pro rata warranty on 
the V™-technology Li-Ion Battery Pack 18 volts or above depending upon the amount of use.  
During this additional warranty period, the customer pays for only the useable service received 
over and above the fi rst 1000 Charges/2 years, based on the date of fi rst charge and number 
of charges found on the battery pack via Milwaukee’s V™-technology Service Reader.

Warranty Registration is not necessary to obtain the applicable warranty on a 

MILWAUKEE

 

product.  However, proof of purchase in the form of a sales receipt or other information deemed 
suffi cient by 

MILWAUKEE

, is requested.

ACCEPTANCE OF THE EXCLUSIVE REPAIR AND REPLACEMENT REMEDIES DE-
SCRIBED HEREIN IS A CONDITION OF THE CONTRACT FOR THE PURCHASE OF 
EVERY 

MILWAUKEE

 PRODUCT.  IF YOU DO NOT AGREE TO THIS CONDITION, YOU 

SHOULD NOT PURCHASE THE PRODUCT.  IN NO EVENT SHALL 

MILWAUKEE

 BE LI-

ABLE FOR ANY INCIDENTAL, SPECIAL, CONSEQUENTIAL OR PUNITIVE DAMAGES, 
OR FOR ANY COSTS, ATTORNEY FEES, EXPENSES, LOSSES OR DELAYS ALLEGED 
TO BE AS A CONSEQUENCE OF ANY DAMAGE TO, FAILURE OF, OR DEFECT IN ANY 
PRODUCT INCLUDING, BUT NOT LIMITED TO, ANY CLAIMS FOR LOSS OF PROFITS.  
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OR CON-
DITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED.  WITHOUT LIMITING THE 
GENERALITY OF THE FOREGOING, 

MILWAUKEE

 DISCLAIMS ANY IMPLIED WARRANTY 

OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR USE OR PURPOSE, AND ALL 
OTHER WARRANTIES.

This warranty applies to product sold in the U.S.A., Canada and Mexico only.

Summary of Contents for V28 0779-20
















Reviews: