17
ENGLISH
• the power tool is overloaded
Do not reach into the machine while it is running.
The insertion tool may become hot during use.
• when changing tools
• when setting the device down
Sawdust and splinters must not be removed while the machine is
running.
When working in walls ceiling, or
fl
oor, take care to avoid electric
cables and gas or waterpipes.
Clamp your workpiece with a clamping device. Unclamped
workpieces can cause severe injury and damage.
Remove the battery pack before starting any work on the machine.
Do not dispose of used battery packs in the household refuse or by
burning them. Milwaukee Distributors o
ff
er to retrieve old batteries
to protect our environment.
Do not store the battery pack together with metal objects (short
circuit risk).
Use only System M18 chargers for charging System M18 battery
packs. Do not use battery packs from other systems.
Never break open battery packs and chargers and store only in dry
rooms. Keep dry at all times.
Battery acid may leak from damaged batteries under extreme load
or extreme temperatures. In case of contact with battery acid wash
it o
ff
immediately with soap and water. In case of eye contact rinse
thoroughly for at least 10 minutes and immediately seek medical
attention.
WARNING
This device contains a lithium button/coin cell
battery. A new or used battery can cause severe internal burns and
lead to death in as little as 2 hours if swal lowed or enters the body.
Always secure the battery cover. If it does not close securely, stop
using the device, remove the batteries, and keep it away from
children. If you think batteries may have been swallowed or
entered the body, seek immediate medical attention.
Warning!
To reduce the risk of
fi
re, personal injury, and product
damage due to a short circuit, never immerse your tool, battery
pack or charger in
fl
uid or al-low a
fl
uid to
fl
ow inside them.
Corrosive or conductive
fl
uids, such as seawater, certain industrial
chemicals, and bleach or bleach containing products, etc., Can
cause a short circuit.
SPECIFIED CONDITIONS OF USE
The cordless impact wrench can be used to tighten and loosen
nuts and bolts wherever no mains connection is available.
Do not use this product in any other way as stated for normal use.
EC-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that
the product described under “Technical Data” ful
fi
lls all the relevant
regulations and the directives 2011/65/EU (RoHS), 2014/53/EU,
2006/42/EC, and the following harmonized standards have been
used:
EN 62841-1:2015
EN 62841-2-2:2014
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN 62479:2010
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 300 328 V2.2.2
EN IEC 63000:2018
Winnenden, 2021-10-28
Alexander Krug
Managing Director
Authorized to compile the technical
fi
le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
GB-DECLARATION OF CONFORMITY
We declare as the manufacturer under our sole responsibility that
the product described under “Technical Data” ful
fi
lls all the relevant
provisions of the following Regulations S.I. 2008/1597 (as
amended), S.I. 2017/1206 (as amended), S.I. 2012/3032 (as
amended) and that the following designated standards have been
used:
BS EN 62841-1:2015
BS EN 62841-2-2:2014
BS EN IEC 55014-1:2021
BS EN IEC 55014-2:2021
BS EN 62479:2010
EN 301 489-1 V2.2.3
EN 301 489-17 V3.2.4
EN 300 328 V2.2.2
BS EN IEC 63000:2018
Winnenden, 2021-10-28
Alexander Krug
Managing Director
Authorized to compile the technical
fi
le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
SELECTING MODE
Allow the tool to come to a complete stop before changing modes.
Press the selector button to cycle between the settings. Select
wireless
to change the default settings via the ONE-KEY App
on your smart device.
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool, please
reference the Quick Start guide included with this product or go to
www.milwaukeetool.com/one-key. To download the ONE-KEY app,
visit the App Store or Google Play from your smart device.
When the product experiences ESD, the speed LED shuts down
and the product cannot adjust speed. It needs the battery and coin
cell removed and reinserted to recover (see page 6 & 15).
Also, when the product experiences ESD, the Bluetooth
communication will be disconnected. It needs to be reset manually
to recover.
We considered the results to be within our minimum acceptable
performance level according to EN 55014-2 / EN 301489-1 / EN
301489-17.
OPERATION
Note: It is recommended after fastening to always check the
torque with a torque wrench.
The fastening torque is a
ff
ected by a wide variety of factors
including the following.
• State of battery charge – When the battery is discharged voltage
will drop and the fastening torque will be reduced.
• Operation at speeds – Operating the tool at low speeds will
cause a reduction in fastening torques.
• Fastening position – Holding the tool or the driving fastener in
various angles will a
ff
ect the torque.
• Drive accessory/socket – Failure to use the correct size
accessory or socket, or a non-impact rated accessory may cause
a reduction in the fastening torque.
470 649 - M18ONEID2.indd 17
470 649 - M18ONEID2.indd 17
28.10.2021 13:00:26
28.10.2021 13:00:26