Milwaukee M18 FSSM32, Operator'S Manual

Page: 4 / 8

4
ASSEMBLY
WARNING
Recharge only with the charger
-
manual supplied with your charger and battery.
Removing/Inserting the Battery
To remove the battery, unlatch the battery door, push
in the release buttons and pull the battery pack away
from the tool. Close and relatch the battery door.
WARNING
Always remove battery pack before
changing or removing accessories.
To insert the battery, unlatch the battery door and slide
the pack into the body of the tool. Make sure it
latches securely into place. Close and relatch the
battery door.
CAUTION
To prevent damage to the cable and
attachments, do not use in larger
diameter pipes.
Cable Attachment Installation
To install the attachment:
Snap the attachment coupler into the cable coupler.
Test the cable before inserting into the drain to make
To remove the attachment:
Insert the pin key into the coupling hole and pull at-
Connecting/Disconnecting Sectional Cables
Keep the cable couplings clean and lubricated. The
pin key must move freely and fully extend to secure
the connection.
To connect the sectional cables, slide the two cable
couplings together. Make sure the connection is secure.
1 2
To disconnect the sectional cables, insert the pin
key into the coupling hole and pull the cables away
from each other.
1
2
Using the Telescoping Handle
To use the telescoping handle, press and hold the
unlock button located near the handle. Pull the handle
out until it locks into place.
To return the handle, press and hold the unlock button
and push the handle into place.
Only use accessories specifically
WARNING
recommended for this tool. Others
may be hazardous.
FUNCTIONAL DESCRIPTION
1. Lever arm
2. Carry hook
3. Feed collar
4. Cable hook
5. Handle release button
6. Telescoping handle
7. Lever arm collar
1
8
3
4
2
5
9
10
7
11
8. ONE-KEY™ indicator
9.
10. Battery door
11. Rear guide hose
connection
6
11
To reduce the risk of fire,
ADDITIONAL BATTERY SAFETY RULES
WAR NIN G
personal injury , and product damage due to a
short circuit, never immerse your tool, battery
pack or charger in fluid or allow a fluid to flow
inside them. Corrosive or conductive fluids,
such as seawater , certain industrial chemicals,
and bleach or bleach-containing products, etc.,
can cause a short circuit.
SPECIFICATIONS
Cat. No. ............................................. M18 FSSM32
Volts.............................................................18V DC
Battery Type .................................................M18™
Charger Type................................................M18™
No Load RPM ....................................................700
Cable Size ........................................ 32mm (1-1/4")
Recommended Pipe Diameter.... 50-203mm (2"-8")
Recommended Ambient
Operating Temperature .................... -17°C to 51°C