Milwaukee M18 FAG125XPDB, Operator'S Manual

Page: 7 / 12

7
3.0 mm (1/8")
6.35 mm (1/4")
Sanding Disc Selection
Use sanding discs and accessories that are:
7. Press in the spindle lock button while turning the
8. To remove wheel, remove the battery pack and
reverse the procedure.
arranged in clusters for faster stock removal and
cleaning. Ideal for removing paint from cars, boats,
etc. without clogging.
‡
Ceramic: Lasts up to 3 times longer than Aluminium
Oxide Discs. For general metal working. Ideal for
tough jobs.
Installing Backing Pad and Sanding Discs
‡
correct size as written on tool’s nameplate.
‡
rated at or above the RPM listed on the tool’s name-
plate.
‡
correct accessory, wheel type and grit for the job.
Select the correct type of sanding disc for your job.
Generally, use 24 or 36 grit for heavy stock removal;
50, 60, or 80 grit for medium stock removal and 120
-
‡
1. Remove the battery pack.
2
from gear case.
4. Place sanding disc on backing pad and secure
assembly to spindle with disc nut.
Installing/Removing/Cleaning
the Vent Clip
2.
1.
3.
nut clockwise. Tighten securely.
6. To remove backing pad and sanding disc, remove
the battery pack and reverse the procedure.
ONE-KEY™ Indicator
Solid Blue
Blinking Blue
Blinking Red
Wireless mode is active and ready
app.
Tool is actively communicating with
the ONE-KEY™ app.
Tool is in security lockout and can
be unlocked by the owner via the
ONE-KEY™ app.
ONE-KEY™
Flange nut position for
3.0mm (1/8") thick or
less wheels
Flange nut
position for
6.35 mm (1/4") thick or more
wheels
Aluminium Oxide: For fast cutting, general
purpose discs for most metal jobs. Best for
cold-rolled steel, stainless steel or metals requiring
tough, fast cutting, long lasting abrasives.
WARNING
Always remove battery pack
before changing or removing
accessories.
Wipe the accessories, disc nut and spindle to
remove dust and debris. Inspect the parts for
damage. Replace if needed. Use only
MILWAUKEE
®
mounting hardware designed for
your tool.
Using the vent clip will increase the performance
and extend the life of the tool.
To attach the vent clip, snap the vent clip over the
tool’s handle.
To remove the vent clip, insert a flat screwdriver
into the notch at the top of the vent clip and pry
away from the tool.
To clean the vent clip, tap against a hard surface,
or blow clean with compressed air.
To learn more about the ONE-KEY™ functionality
for this tool, go to onekey.milwaukeetools.com.au /
onekey.milwaukeetools.co.nz. To download the
ONE-KEY™ app, visit the App Store or Google Play
from your smart device.
Installing/Removing Grinding Wheels
Make sure the wheel does not extend beyond the
bottom of the guard. Threaded hub grinding wheels
may require a deeper guard (see "Accessories").
1. Remove the battery pack.
2. Properly position the guard.
5. Place the selected wheel on the spindle and align
to wheel thickness.
WARNING
Always remove battery pack
before changing or removing
accessories.
3. Wipe the flange, flange nut and spindle to remove
dust and debris. Inspect the parts for damage.
Replace if needed. Use only MILWAUKEE ®
mounting hardware designed for your tool.
‡
Aluminium Zirconia Bi-Cut: Unique grit pattern is
Backing pad
Spindle
Disc nut
Sanding disc
Spindle
Flange
Wheel
Flange nut