background image

10

ACCESSORIES

WARNING

Use only recommended accesso-

ries. Others may be hazardous.

For a complete listing of accessories, go online to 

www.milwaukeetool.com.au /

www.milwaukeetool.co.nz or contact a distributor.

Internal Battery

An internal battery is used to facilitate full ONE-KEY™ 

functionality.

To replace the battery:

1. Remove the battery pack.

2. Remove the screw(s) and open the battery door.

3. Remove the old battery, keep it away from children,

and dispose of it properly.

4. Insert the new battery (3V CR2032), with the posi-

tive side facing up.

5. Close the battery door and tighten the screw(s)

securely.

Cleaning

Clean  dust  and  debris  from  vents.  Keep  handles 

clean, dry and free of oil or grease. Use only mild 

soap and a damp cloth to clean, since certain clean-

ing agents and solvents are harmful to plastics and 

other insulated parts. Some of these include gasoline, 

turpentine, lacquer thinner, paint thinner, chlorinated 

cleaning solvents, ammonia and household deter-

combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and charger 

to the nearest authorised service centre.

Summary of Contents for M18 FAG125XPDB













Reviews: