3
to another.
Shorting the battery terminals together
may cause burns or a fire.
• Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact ac
-
cidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause irritation
or burns.
• Do not use a battery pack or tool that is dam
-
aged or modified.
Damaged or modified batteries
may exhibit unpredictable behavior resulting in fire,
explosion or risk of injury.
• Do not expose a battery pack or tool to fire or
excessive temperature.
Exposure to fire or tem
-
perature above
130
°
C
(
265
°
F
) may cause explosion.
• Follow all charging instructions and do not charge
the battery pack or tool outside the temperature
range specified in the instructions.
Charging im-
properly or at temperatures outside the specified range
may damage the battery and increase the risk of fire.
SERVICE
• Have your power tool serviced by a qualified
repair person using only identical replacement
parts.
This will ensure that the safety of the power
tool is maintained.
• Never service damaged battery packs.
Service
of battery packs should only be performed by the
manufacturer or authori
s
ed service providers.
SPECIFIC SAFETY RULES FOR
MULTIMEDIA CAMERA
•
Maintain labels and nameplates.
These carry
important information. If unreadable or missing,
contact a
MILWAUKEE
®
service
facility
for
a
replacement.
Federal
Communications
Commission
WARNING
This is a class
A product. In
a domestic environment this
product may cause radio interference in which case
the user may be required to take adequate measures.
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference when the equipment is operated
in a
commercial environment. This equipment
generates
uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruc-
tion manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference
in which case the user will be required to correct the
interference at his own expense.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and
(2) this device must accept any interference received,
including interference that may cause undesired
operation.
SPECIFICATIONS
Cat. No. ..........................................
M12ICAV3-90C
Volts
..............................................................
12 DC
Battery Type
.................................................
M12™
Charger Type
................................................
M12™
Memory Card
......................................................
SD
Interface Cable
......................................
Micro USB
SYMBOLOGY
Volts
Direct Current
User Must Read Operator's Manual
Wear Eye Protection
To Prevent Electric Shock, Do Not
Allow Product to Contact Live
Electrical Parts
Regulatory Compliance Mark
(RCM). Product meets applicable
regulatory requirements.
Federal Communications Commission
Similarly in Australia and New Zealand this product
complies to ACMA EMC requirements.
FUNCTIONAL DESCRIPTION
11
12
1
2
3
8
6
7
5
4
9
10
21
22
23
PIVOTVIEW™ Cable
21. Pivot joint
22. Pivot knob
23. Release buttons
1/4
-
20
UNC Threaded accessory bay
(back of Display)
1. Camera
2. Camera LED
3. Cable
4. Socket sleeve
5. Display
6. Media cover
8. Handle power button
9. Handle
10. Trigger
11. LED brightness dial
12. Speaker
13. Power button
14. Picture / Movie toggle
15. Arrow buttons
16. OK button
17. Playback button
18. Setting button
19.
20.
Reset button (back of Display)
7. Microphone
13
14
15
16
17
18
19
20
