background image

6

accessories

For a complete listing of accessories refer to your

 

 

Electric Tool catalog or go online 

to 

ZZZPLOZDXNHHWRROVFRPDX

To obtain a catalog, contact your local distributor or service center.

Warning 

Always remove battery pack 

before  changing  or  removing  accessories. 

Only use accessories specifically recommend

-

ed  for  this  tool.  Others  may  be  hazardous. 

Cleaning

Clean dust and debris from charger and tool vents. 

Keep tool handles clean, dry and free of oil or 

grease. Use only mild soap and a damp cloth to 

clean the tool, battery pack and charger since certain 

cleaning agents and solvents are harmful to plastics 

and other insulated parts. Some of these include 

gasoline, turpentine, lacquer thinner, paint thinner, 

chlorinated cleaning solvents, ammonia and house-

hold detergents containing ammonia. Never use 

flammable or combustible solvents around tools.

Repairs

For repairs, return the tool, battery pack and 

charger to the nearest service center.

Warning 

To reduce the risk of per

-

sonal injury and damage, never immerse your 

tool, battery pack or charger in liquid or allow 

a liquid to flow inside them.

Maintaining Tool 

Keep your tool, battery pack and charger in good 

repair by adopting a regular maintenance program. 

After six months to one year, depending on use, 

return the tool, battery pack and charger to 

 service facility for:

• Lubrication

• Mechanical inspection and cleaning (gears, spin

-

dles, bearings, housing, etc.)

• Electrical  inspection  (battery  pack,  charger, 

motor)

• Testing to assure proper mechanical and electrical 

operation

If the tool does not start or operate at full power 

with a fully charged battery pack, clean the contacts 

on the battery pack. If the tool still does not work 

properly, return the tool, charger and battery pack, 

to a 

 service facility for repairs.

mainTenance

Warning 

To reduce the risk of injury, 

always unplug the charger and remove the 

battery pack from the charger or tool before 

performing  any  maintenance.  Never  disas

-

semble  the  tool,  battery  pack  or  charger. 

Contact  a 

milWaukee

  service  facility  for 

ALL repairs.

 

ZZZPLOZDXNHHWRROVFRQ]

 

MILWAUKEE

®

MILWAUKEE

®

MILWAUKEE

®

Summary of Contents for M12 BPS-0









Reviews: