3
MAINTENANCE
WARNING
Maintaining Tool
Cleaning
Greasing the Cable Feed
Apply grease to the cable feed after each use.
Zerk Fittings
Oiling the Cable Feed Bearings
1. Remove battery pack.
2. Press the quick release button.
3.
5.
Nose of Cable Feed
Bearings
To reduce the risk of injury,
always unplug the charger and
remove the battery pack from the charger or tool
before performing any maintenance. Never
disassemble the tool, battery pack or charger.
Contact a
MILWAUKEE
®
service facility for ALL
repairs.
Keep your tool in good repair by adopting a regular
maintenance program. Return the tool to a
MILWAUKEE
®
service facility for repair.
Clean dust and debris from vents. Keep handles clean,
dry and free of oil or grease. Use only mild soap and a
damp cloth to clean, since certain cleaning agents and
solvents are harmful to plastics and other insulated
parts. Some of these include petrol, turpentine, lacquer
thinner, paint thinner, chlorinated cleaning solvents,
ammonia and household detergents containing
ammonia. Never use flammable or combustible
solvents around tools.
Push the cable feed handle to the maximum retract
position
4.
Apply bearing grease to the upper Zerk fitting,
sufficiently covering the fitting.
Press the cable feed ratchet lever down.
6.
Push the cable feed handle to the maximum feed
position
7.
Apply bearing grease to the two lower Zerk fittings,
sufficiently covering the fittings.
1. Remove battery pack.
2. Press the quick release button.
3.
5.
Use a hose to clean out the cable feed with clean
water to remove contaminants. Drain the drum
completely by removing the drum plug.
4.
Move the cable feed handle to the maximum retract
position and apply a penetrating oil into the nose
of the cable feed directly onto all three bearings.
Sufficiently cover the bearing seals.
Move the cable feed handle to the maximum feed
position and repeat.
6.
Press the ratchet lever down and then feed and
retract the cable 30-60 cm (1-2 feet) multiple times
to work the oil around.
7.
Repeat after each use.
Keep all exposed, moving, and rotating parts cleaned
and properly oiled after each use.
