2
OPERATION
WARNING
Using the Cable Feed Assembly
To use the cable feed:
1. Insert the battery pack.
3.
6.
5.
7.
8.
4
6
7
5
Move the Forward/
OFF
/Reverse switch to
Forward
2 .
Ensure the alignment lines as shown in figure 2 are
aligned. This will disengage the cable advancement
function.
4.
Use the foot pedal to start the drum.
To engage the cable feed, press the cable feed
ratchet lever down.
NOTE:
Do not over-press the lever arm. Flexible
cable requires less force to feed the cable while stiff
cable requires more force to feed the cable.
To
advance
the cable, push the cable feed handle
clockwise The further the handle is pushed, the
faster the cable will advance.
To
retract
the cable, push the cable feed handle
anti-clockwise The further the handle is pushed,
the faster the cable will retract.
To
stop
the cable from advancing or retracting,
disengage the cable feed by pressing the quick
release button. Move the cable feed ratchet lever to
the centre to slow/stop the cable.
The cable feed can be used to assist in advancing and
retrieving the cable.
To reduce the risk of injury,
wear safety goggles or glasses
with side shields. Use latex or rubber gloves inside
the gloves recommended by the manufacture to
avoid entanglement. Cable tip may be sharp.
