3
SIDE PLATE ANGLE
CORRECT
Side Plate Filing Angle
Backward
Slope
Hook
80°
INCORRECT
Side Plate Filing Angle
•
if correct
•
CORRECT - 80° Produced automatically
Increases potential
HOOK - “Grabs” and dulls quickly.
of KICKBACK. Results from using
• BACKWARD SLOPE
pressure,
Results from
- Needs too much feed
DEPTH GAUGE CLEARANCE
held too high.
causes excessive wear to bar and chain.
•
•
the depth gauge
clearance.
Flat File
Depth Gauge Jointer
The depth gauge should be maintained at a
clearance of 0.635 mm (0.025"). Use a depth
gauge tool for checking the depth gauge
clearances.
Restore
original
shape
by
rounding
the front
Use a flat file and a depth gauge jointer to lower all
gauges uniformly. Depth gauge jointers are
available in 0.5 mm (0.020") to 0.89 mm (0.035").
Use a 0.635 mm (0.025") depth gauge jointer. After
lowering each depth gauge, restore original shape
by rounding the front. Be careful not to damage
adjoining drive links with the edge of the file.
Depth gauges must be adjusted with the flat file in
the same direction the adjoining cutter was filed
with the round file. Use care not to contact cutter
face with flat file when adjusting depth gauges.
