6
operaTion
/RFNLQJDQG8QORFNLQJWKH&KHVW&DELQHW
NOTE:
The drawers must be fully closed before
locking/unlocking the unit.
Insert the key. Turn it fully left to lock, or fully right
to unlock. Always remove the key after locking
and unlocking.
0RYLQJ WKH &KHVW&DELQHW RQ DQ ,QFOLQH RU
Rough Surface
Take care that the chest/
cabinet does not tip or
become unbalanced when
moving it on an incline
or rough surface. Do not
exceed an incline of 10
degrees. Lock the chest/
cabinet and secure all
items before moving.
8VLQJWKH&DVWHU%UDNHV
To lock the swivel casters, step down on the le-
vers marked Lock. Be sure to lock both casters to
prevent chest/cabinet from rolling or swiveling. To
unlock casters, push down on the levers marked
Unlock.
5ROOLQJWKH&KHVW&DELQHW
The chest/cabinet is only intended for rolling short
distances. Only roll the chest/cabinet using the
handle. Do not push or pull chest/cabinet by the
frame or product may tip. Do not modify the chest/
cabinet in any way. Drilling holes or modifying the
chest/cabinet will lower the load capacity, which
can cause the chest/cabinet to collapse, resulting
in injury. Lock the chest/cabinet and secure all items
before rolling.
/LIWLQJWKH&KHVW&DELQHW
The cabinet and chest/cabinet combo are not
intended to be lifted. However, if you need to lift,
empty the chest/cabinet and then place straps or
forks inside and next to casters. Do not lift loaded
chests/cabinets. Be sure all bystanders are moved
away before lifting chest/cabinet.
Warning
7RDYRLGLQMXU\RUSURSHUW\
GDPDJHGRQRWH[FHHGPD[LPXPVKHOIFDSDF
-
LW\8VHFDUHZKHQPRYLQJFKHVWFDELQHWRQ
LQFOLQHRUURXJKVXUIDFH&KHVWFDELQHWPD\
WLSLIZHLJKWLVQRWHYHQO\GLVWULEXWHGIURQWWR
EDFNDQGVLGHWRVLGH3ODFHPRUHWKDQKDOI
WKH WRWDO ORDG ZHLJKW RQ WKH ERWWRP FDELQHW
ZKHQSRVVLEOH
,QVWDOOLQJWKH&RUG6WRUDJH%UDFNHWV
Attach the brackets to the back of the chest and
cabinet with two screws (DD) per bracket. Orient
the brackets with one pointed up and one pointed
down so that the power outlet cord can be wrapped
around the brackets for storage.
,QVWDOOLQJWKH&KHVWRQWRWKH&DELQHW
DD
Installing the Drawer Liners and Mat
Place the drawer liners in appropriately sized
drawers and the mat in the chest lid area to protect
the surface.
,QVWDOOLQJWKH%XPSHUV
Attach the four bumpers to the rolling cabinet using
two screws (EE) per bumper.
EE
1. Remove the cabinet mat from the rolling cabinet.
The top chest will not line up with the brackets if
the mat is in place.
2. Place the top chest on top of the rolling cabinet.
NOTE:
The holes in the cabinet are tapped and do
not require nuts.
3. Attach the two brackets to the back of the product
to secure the top chest to the rolling cabinet.
Place the brackets over the holes and secure
with four screws (DD) per bracket.
4. Tighten all screws securely with a Phillips
screwdriver.
cauTion
7ZRSHRSOHPD\EHUHTXLUHG
WRFRPSOHWHLQVWDOODWLRQ
