Milwaukee 4698 80 01, Original Instructions Manual, Page: 12 / 96

10
English
GB
TECHNICAL DATA
Rotary Hammer
K 850 S
220 - 240 V
K 850 S
110 - 120 V
Production code 4698 80 01...
... 000001-999999
4698 90 01...
... 000001-999999
Rated input 1470 W 1470 W
No-load speed 210-385 min
-1
210-385 min
-1
Output 815 W 815 W
Speed under load 1600-2900 min
-1
1600-2900 min
-1
Impact energy per stroke according to EPTA-Procedure 05/2009 11 J 11 J
Chuck neck diameter 66 mm 66 mm
Drilling capacity in concrete 45 mm (SDS-max) 45 mm (SDS-max)
Tunnel bit in concrete, bricks and limestone 65 mm (SDS-max) 65 mm (SDS-max)
Core cutter in concrete, bricks and limestone 150 mm (SDS-max) 150 mm (SDS-max)
Weight according EPTA-Procedure 01/2014 9,7 kg 9,6 kg
Noise information
Measured values determined according to EN 60745. Typically, the A-weighted noise levels of the tool are:
Hammer-drilling into concrete
Sound pressure level (Uncertainty K=3dB(A)) 94,65 dB (A) 94,65 dB (A)
Sound power level (Uncertainty K=3dB(A)) 105,65 dB (A) 105,65 dB (A)
Chiselling
Sound pressure level (Uncertainty K=3dB(A)) 95,81 dB (A) 95,81 dB (A)
Sound power level (Uncertainty K=3dB(A)) 106,81 dB (A) 106,81 dB (A)
Wear ear protectors!
Vibration information
Vibration total values (triaxial vector sum) determined according to EN 60745
Hammer-drilling into concrete
Vibration emission value a
h, HD
Uncertainty K=
9,58 m/s 2
1,5 m/s 2
9,58 m/s 2
1,5 m/s 2
Chiselling
Vibration emission value a
h, Cheq
10,14 m/s
2
10,14 m/s
2
WARNING!
The vibration emission level given in this information sheet has been measured in accordance with a standardised test given in EN 60745
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different applications,
with different accessories or poorly maintained, the vibration emission may differ. This may significantly increase the exposure level over
the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
WARNING! Read all safety warnings and all
instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
HAMMER SAFETY WARNINGS
Wear ear protectors!
Exposure to noise can cause hearing loss.
Use auxiliary handle(s), if supplied with the tool.
Loss of
control can cause personal injury.
Hold the power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory may
contact hidden wiring or its own cord.
Cutting accessory
contacting a “live” wire may make exposed metal parts of the
power tool “live” and could give the operator an electric shock.
Additional Safety and Working Instructions
Use protective equipment. Always wear safety glasses when
working with the machine. The use of protective clothing is
recommended, such as dust mask, protective gloves, sturdy non-
slip footwear, helmet and ear defenders.
The dust produced when using this tool may be harmful to health.
Do not inhale the dust. Use a dust absorption system and wear a
suitable dust protection mask. Remove deposited dust thoroughly,
e.g. with a vacuum cleaner.