WARNING
To avoid shock or injury, do not perform the verification tests or calibration procedures
described in the manual unless you are qualified to do so.
The information provided in this document is for the use of qualified personnel only.
CAUTION
The 2231-20 contain parts that can be damaged
by static discharge.
Follow the standard practices for handling static sensitive devices.
Precautions and Safety Information
Use the Meter only as described in the Operator’s Manual. If you do not do so, the protection provided
by the Meter may be impaired. Read the “Safety Information” page before servicing this product.
In this manual, a
WARNING
identifies conditions and actions that pose hazard (s) to the user; a
CAUTION
identifies conditions and actions that may damage the Meter or the test instruments.
SAFETY
Review the following safety precautions to avoid injury and prevent damage to this product or
products connected to it. To avoid potential hazards, use the product only as specified.
CAUTION:
These statements identify conditions or practices that could result in damage to
the equipment or other property.
WARNING:
These statements identify conditions or practices that could result in personal
injury or loss of life.
Specific precautions
Do not operate without covers.
To avoid personal injury, do not apply any voltage or current to
the product without covers in place.
Electric overload.
Never apply a voltage to a connector on the product that is outside the range
specified for that connector.
Avoid electric shock.
To avoid injury or loss of life, do not connect or disconnect probes or test
leads from the meter while they are connected to a voltage source.
Do not operate in wet/damp conditions.
To avoid electric shock, do not operate this product in
wet or damp conditions.
To reduce the risk of injury, user must read and understand operator’s manual.
