ADJUSTMENT OF THE POWDERTYPE
The manufacturers of baby milk powder use
“measuring spoons”
to dose the powder. In order to meet the
requirements of the individual age groups, the quantities of powder from the milk powder manufacturers are
adapted to the nutritional needs of the children. This information is given on the milk pack as follows: 1 level
measuring spoon = approx. X grams of powder.
The milquino® fully automatic baby milk machine also follows this logic. You can adjust the dosage of the machine to
the powder you are using. This setting is saved until you change it again (e.g. when changing the type of powder).
The type of powder can be set in 1-10 steps. The basic setting of the device is level 5.
(without guarantee: This basic setting doses 4.6g for most milk powders.)
Due to the composition of the milk powder, there may be small deviations.
For adjusting the amount of powder dispensing proceed as follows:
01
. Ensure the device is switched on. For switching on push shortly ON/OFF button
02.
Press and hold down key 2
with one hand while turning the rotary control A with the other hand to the
required level.
Basic setting: 5 LEDs ; less powder 4,3,2,1 LED ; more powder 6,7,8,9,10 LED
03.
Release Button 2 .
The milquino® saves the setting by switching it off and on again with the ON / OFF button.
Please note the following:
To set the type of powder, the powder tank must be completely filled. With the very first removal, up to ½ spoon can
be missing because the dosing screw has to be filled with powder first.
The level settings are recommendations from us. The powder manufacturer also only gives approximate figures. The
same fluctuations can occur that occur with spoon dosing.
With some powders it may be necessary that the powder in the tank has to be redistributed a little after the removal
of approx. 60g in order to maintain an exact dosage.
06
Summary of Contents for Black & White
Page 2: ...Notes...
Page 19: ...NOTES...