PRODUCTION OF MILK BOTTLE
12
01
. Fill drinking water into the water tank and check if there is enough baby formula in the formula container. If
necessary, push the formula slightly downwards.
02.
Switch the machine on by pushing the button 1 (if you have not already).
03
. Position a suitable baby bottle under the powder release. Make sure that it is exactly under the release. If you
want to prepare a small bottle (up to 150ml), please use the drip tray elevation. Remove the stainless steel drip tray
cover and use the drip tray elevation instead.
04.
Set the required amount of water (60-240ml) with the Wheel A.
NOTE: One LED is equivalent to 30ml. The first two LEDs are always active and correspond to 60ml.
05.
Set the required amount of formula (2
–
7 spoons).
NOTE: The first LED correspond to 2 spoon, every other LED adds 1 spoon.
06.
To start the serving, push the button 2 . The preparation stops automatically.
Now use a spoon to stir the milk or screw the nipple to the bottle and shake conscientious.
Summary of Contents for Black & White
Page 2: ...Notes...
Page 19: ...NOTES...
