Milo Range v5 PRO System, Setup Manual

Page: 21 / 22

www.milorange.com
Power Up
1. Turn on the power to the projector using the remote control or the buttons on the projector. Wait 30
seconds while the projector warms up.
2. Press the power button on the front of the MILO computer (Figure 16, Item 1) . After about 1
minute, Windows will finish loading. You should see a MILO Range logo on the instructor screen
and projected screens.
Figure 16 – MILO Computer
3. Adjust the projector so that the image fills the projection screen’s white display area. For ground
mounted systems, you may need to adjust the feet on the projector to change the pitch (angle) of
the projector. For ceiling mounted systems, the mounting hardware has adjustment screws that
can be loosened to allow pitch and yaw to be adjusted. In addition, you can use the projector lens
zoom and focus to adjust the size and sharpness of the projected image.
Power
But
t on
Formatted: PICTURE, Left