Milnor MilTouch, Operator'S Manual, Page: 32 / 178

Chapter 3. MilTouch Wash Formulas
PELLERIN MILNOR CORPORATION
Chapter
3
MilTouch Wash Formulas
BICLJP02 (Published) Book specs- Dates: 20130628 / 20130628 / 20130709 Lang: ENG01 Applic: CLJ
3.1. How to Use the MilTouch Formula Tables
Each standard MilTouch formula is described in a table. Formulas are made up of steps. Each
step is programmed through a series of decisions. In the formula tables, each step decision is
represented by a column, and each step is described by one row of the table.
Part of a typical formula table is shown below, and a definition of each decision follows the table.
3.1.1.
Sample Formula Table
Table 1: Sample Laundry Partial Formula: Example Only
Decision
Step
Number T M M Q F F F H C 3 L S C W S S * SPD D R E
Chem.
Dose
2 0 6 0 0 0 0 1 0 1 1 0 4 0 0 1 0
1
2 0 4 0 0
2 2 0 2 0 0 0 0 1 0 2 0 1 0
3 4 0 1 0
3.1.2.
Definitions of Step Decision Symbols
3.1.2.1.
Type = Type of Step
(0) End Formula —always the last step in a formula; signifies that there are no further steps and
prompts programmer for How to End Formula
(1) 1-way Wash —basket rotates in one direction only throughout this step; used for small goods
(2) 2-way Wash —basket reverses rotation periodically throughout this step; used for goods
which might tangle
(3) Soak Wash —basket is stationary throughout this step; minimizes mechanical action
(4) Intermediate Extract 1 —the slowest extract speed
(5) Intermediate Extract 2 —the medium extract speed
(6) Final Extract —the fastest extract speed
28