Milnor MilTouch, Operator'S Manual, Page: 16 / 178

Chapter 1. How to Use the MilTouch Control
PELLERIN MILNOR CORPORATION
c. Touch the Type button on the Step Choices display, then select the type of step you want.
d. Touch the Time button. Touch each desired units box and erase the value, then enter a
new value.
e. Touch the Confirm button to save the step time.
f. Set the remaining choices for the step.
g. Touch the Save Changes button to save the step.
h. The Steps display appears.
5. Repeat the steps above to add and modify steps.
1.1.1.1.
3.
To Erase a Wash Formula
1. Touch the Name button for the formula you want to erase.
2. Touch the Erase button.
3. Confirm that you want to erase the formula.
1.1.1.2.
The Configuration Display
Figure 5: The Configuration Display
Typical View Legend
.
A. Machine Type button
B. Machine Name button
C. Laundry Type button
D. Language
E. Water Unit (inches or
centimeters) button
F. Water Offset button
G. Water Level buttons for
universal levels
H. Temperature Probe button
I. Temperature Unit
J. Time before Steam Error
button
K. Time before Cooldown
Error button
L. Third Water Valve button
M. Second Drain Valve
button
N. RinSave Option button
O. Time before Fill Error
button
P. Counts per 10 RPMs
button
Q. Scroll buttons
R. Password Menu button
S. Save Configuration and
Exit button
T. Exit (Abandon Changes)
button
1.1.1.2.
1.
The Machine Configure Decisions
—Use the information below to configure the machine
12