Milnor 36030, Installation Manual

Page: 29 / 49

#& # $" #"6hh GQcXUb 5hdbQSd_b 9^cdQ\\QdY_^
@5<<5B9> =9<>?B 3?B@?B1D9?>
When shipped, the shell mounted cone and the mid-frame mounted cup are locked together using
a center bolt and shims inserted under the weldment cup (Figure 4 and Figure 5). Remove the
center bolt and shims before placing machine in service. Re-install the weldment as shown in
Figure 6 and store the shims underneath the mid frame as shown in Figure 7. Retain center bolts
in the event that the machine is moved.
Figure 4: Cone-can weldment as
shipped, locking the shell and mid
frame together Figure 5: Lock down bolt
Figure 6: Cup weldment when
setup for operation Figure 7: Shims stored under the
mid frame
— End of BIIFLI01 —
25