Milnor 30022X8W, Manual, Page: 26 / 54

Chapter 2. Normal Machine Operation
PELLERIN MILNOR CORPORATION
2.1.7.2.
For End Code 3 ( Tumbling )
—End code 3 ( Tumbling ) allows you to open the door and
remove some of the goods, then close the door and resume tumbling to loosen more goods from
the basket.
Display or Action Explanation
l
Remove power from the 3-wire circuit, silence the operator
signal, and stop any basket motion in progress. This button also
unlocks the door so you can open it.
When the basket stops turning, open the door and remove some or all of the goods from the
machine.
l + d
Open the door for unloading.
Remove any desired portion of the load.
D + l
Close the door.
1
Resumes the tumbling action without the operator signal.
Tumbling continues for another two minutes, or until you press
l
.
— End of BICWCO03 —
22