Millipore Elix Essential 10, User Manual

Page: 19 / 54

System
Elix® Essential 3, 5, 10, 15 (UV) / RiOs™ Essential 5, 8, 16, 24 17
Software modes
The different software modes are described below with some examples.
•
System is in Standby or maintenance.
•
Tank is 70%.
•
Tool icon indicates maintenance.
•
System is in Standby or maintenance.
•
Tool icon indicates maintenance.
•
Values area indicates Cl2 sanitization start.
•
Gears icon indicates parameters.
•
Values area indicates ECO mode setting.
•
System is in Ready or in Tank filling or in Tank full.
•
Tank is 90%.
•
Product water resistivity is 15 M
Ω
.cm.
•
Tank is 70%.
•
Product water resistivity is 15 M
Ω
.cm.
•
The Progard® pack must be changed in 15 days: order a new
Progard® pack.
•
Yellow color display and : the Progard® pack must be changed.
•
Product water resistivity is 15 M
Ω
.cm.
•
Yellow color display and : the CL2 cleaning must be started.
•
Product water resistivity is 15 M
Ω
.cm.
•
Yellow color display, Er:20 and .
•
The system has detected a minor problem that does not affect
the normal operation. Refer to section Error codes at page 38.
•
Red color display and .
•
The system has detected a dysfunction when operating in normal
conditions. In this example, system has detected a low feed water
pressure and has stopped. More investigation is required.
•
Red color display, Er:02 and .
•
The system has detected a dysfunction when operating in normal
conditions. Refer to section Error codes at page 38.
•
Red color display and : the Progard® pack has been removed.
•
Tool icon indicates maintenance.