Direct Detect® Spectrometer User Guide
22
11.2 Changing from Direct Connection to Intranet Connection
,
continued
11. If the connection was successful, the instrument will produce a tone and a message
box will appear to inform you that the connection was successful. If an error message
appears, check with your IT department or contact Technical Service (section 17).
12. Select the
Finish
button to close the software. You should now be able to perform
measurements using the Direct Detect® instrument connected to your intranet.
11.3 Changing from Intranet Connection to Direct Connection
IMPORTANT:
This section assumes that the Direct Detect® instrument and Netbook
computer are currently connected to your intranet using two
standard
RJ45 Cat5e
Ethernet cables.
1. Run the
IP Address Change Utility
(section 11.1) and confirm that the requirements
are all valid (green check marks).
2. Select the
Next
button to proceed to the
IP Settings
screen of the utility and select the
first option,
I want to connect the instrument directly to the computer.
Figure 23. Selecting direct connection
3. Select the
Next
button to proceed.
4. The software will now make the necessary modifications to the Direct Detect® software
and instrument, as well as the host computer. If the modifications are successful you
will be informed that your instrument settings have been updated (Figure 24).
