Page 12 of 113
Additional Features
Tests can be run in either the Standard Mode, in which filtration parameters
are chosen manually, or in the Test Method Mode, in which every step of the
method appears on the screen with preloaded parameters for speed and time
to ensure there is no deviation from the approved test protocol. The test
methods are created with the Steritest
®
Symbio Software and transferred to
the Steritest
®
Symbio Pump through a network cable or with USB flash drive.
The software (from version 1.1.0.0) can be used in ten languages (German,
English, Spanish, French, Italian, Portuguese, Japanese, Simplified Chinese,
Turkish, and Russian).
The drain tray and bottle holder are ergonomically positioned around the pump
head for easy access in limited-space environments.
A wide range of optional accessories are available to improve the sterility testing
workflow:
•
A footswitch with two operation modes
•
A glass ampoule breaker
•
A support rod extension for hanging sterile bags or the Steridilutor vent
chamber
•
A syringe support that facilites the handling of pre-filled syringes (with or
without needles), and provides an automatic rinsing function
•
A liquid waste overfill sensor that signals an alarm on the pump screen
•
A communication hub holder to fix the communication hub to one of the
four legs of the laminar flow hood
•
A communication hub holder to fix the communication hub below the
isolator
•
A
tray that carries up to 5 Steritest
®
canisters and an optional rack to hold
up to 4 carrying trays.
NOTE
Go to
www.millipore.com/steritest-symbio
to check the latest version
of this document and get information about Steritest
®
Symbio Pump
optional accessories.
Operator and Equipment Safety
All employees who will operate and/or be near the Steritest
®
Symbio Pump must
comply with the following
:
•
Read and understand this user guide before using the pump. Failure to follow
operating instructions could result in user injury or damage to the instrument.
