Operating Principle
The Elix water system is designed to produce Type 2 water to feed a SDS 500 reservoir or
a custom tank and to manage a distribution loop and accessories when installed. The
system can be installed in a single or multi-system configuration.
• The water system purifies tap water using a Progard
®
Pack(s) and Reverse Osmosis
followed by Elix
®
Technology. This process is called Makeup (I).
• The purified water is then stored in a tank (SDS 500 or custom tank). This is referred to
as Storage (II).
• The stored water can be distributed to a loop . This process is called Distribution (III).
HX 7040 flow schematic:
HR 7060 flow schematic:
This view and more information about components can be retrieved using the Flow
Schematic application
at
(Glance Workspace > Flow Schematic)
The volume of water in the Tank controls Makeup water production.
The storage part of the system is passive. The volume of water in the tank is a function of
both the Makeup and Distribution processes.
Ready mode is used to get the processes operating.
Standby mode is used to stop the corresponding process in the event of a leak or
maintenance purpose.
System operating modes are listed in the Appendix.
The Makeup and Distribution are two independent processes. When one of the processes
is in standby, alarm stop or maintenance it will not stop the other process from working.
16 | System Overview
