Miller Vulcan 810 NYC, Owner'S Manual

Page: 83 / 100

VI-17
REF. NO. PART
NO. REQ'D NUMBER DESCRIPTION
27 2 -- COTTER PIN, 1/8" X 1-1/4"
28 2 -- CLEVIS PIN, 5/8" X 1-1/2"
29 1 -- SCREW, 1/4"-20 x 1/2" SKT BUTTON HD
30 2 -- SCREW, 3/8"-16 X 1" FL HD SKT CAP
31 1 0702131 SHAFT, INNER TUBE CYLINDER
32 1 0703345 SHAFT, EXTEND CYLINDER
33 2 0710092 THRUST WASHER
34 2 0713885 PIN, CYLINDER (L-ARM END)
35 1 0715553 PLATE, OUTER W/L BOOM STOP
36 1 0716934 PLATE, HOSE PROTECTOR
37 1 0717589 PLATE, CROSSBAR POSITIONING
38 1 0803911 L-ARM WELDMENT, LEFT
39 1 0803912 L-ARM WELDMENT, RIGHT
40 1 0803928 INNER BOOM WELDMENT
41 1 0806980 CROSSBAR WELDMENT, EXPRESS
42 1 0806981 PIVOT PIN WELDMENT
43 2 0806982 PIN WELDMENT, " L" ARM PIVOT
44 2 9053713 FLANGE BEARING, 1-1/2" I.D. OILITE
45 1 9055062 SNAP RING, 5/8" EXTERNAL
46 1 810040004 SMALL SHEAVE, 2 GROOVES 4"
47 1 810041000 HOSE COVER WELDMENT, WRECKER ASSY
48 1 810050001 SLEEVE CROSSBAR ASSEMBLY
49 1 810350500 PIN WELDMENT, LOWER TILT CYLINDER
50 1 810310000 810 OUTER STINGER WELDMENT
51 2 E300002 BEARING, CLAW PIVOT
52 2 HD0106 SPRING PIN, 1/4" X 1-3/4"
Section VI - PARTS (cont'd)
WHEEL LIFT ASSEMBLY (cont'd)