IIIA-
Section IIIA - OPERATIONAL FUNCTIONS
WHEEL LIFT
3A.1
Your new wheel lift is totally hydraulic. It receives its power by means
of a belt driven electric clutch operated hydraulic pump mounted to
the truck engine.
3A.2
The hydraulic pump is electrically engaged and is switched on by the
clutch pump switch mounted in the truck cab. Refer to Figure 3..
THE PUMP IS DESIGNED TO RUN ANY FUNCTION
AT NORMAL IDLE SPEED. DO NOT OVER-REV ENGINE.
3A.3
The hand held control units are electrically switched on by the switch,
and the hydraulic pump is electrically engaged when any function
switch on the hand held control unit is activated.
NOTE
THE PUMP IS ONLY ACTIVATED WHEN A HAND HELD
CONTROL SWITCH IS ACTIVATED.
3A.4
Each wheel lift function of your 80 NYC is controlled from either of
the hand held control units found in the truck cab or the passenger's
side tool compartment. The hand held control unit is clearly marked
as to its functions and directions. See Figure 3A..
Summary of Contents for Vulcan 810 NYC
