Miller Subarc AC/DC 1000, Owner'S Manual

Page: 31 / 52

OM-246 011 Page 27
SECTION 5 − MAKING WELD OUTPUT CONNECTIONS
5-1. Work And Electrode Cable Connections For Single DC or AC Arcs
!
Turn Off welding power
source before opening access
door.
NOTICE − If there are any questions
regarding this procedure, contact the
factory before connecting units.
Connect the proper size and number
of weld output cables (see Section
4-7) to one or more of the welding
power source electrode terminals.
Connect the proper size and number
of ground cables to one or more of the
welding power source work termi-
nals.
Connections
247 476-C
To Electrode
To Work