4
Safety Instructions
Please use this manual to familiarise yourself with the
operation of the Skyline 90 Fluid Head and observe these
instructions to prevent any damage to your equipment.
Ensure that all equipment is operating correctly and free from
defects and damage, also please ensure that the tripod is
steady, secure and that the bowl is approximately horizontal
when attaching the camera. The operator is responsible for
the safe operation of this piece of equipment.
Do not exceed the maximum payload capacity of the Fluid
Head.
Do not leave the camera unattended on the Fluid Head.
Do not release the SLIDING PLATE LOCK whilst the camera
is at an angle.
Do not adjust the tripod whilst the camera is attached to the
Fluid Head.
Ensure PAN HANDLE CLAMP and MITCHELL CASTLE NUT
are securely tightened.
Apply TILT SAFETY LOCK when adding/removing equipment
from the camera or when attaching/removing the camera
from the Fluid Head.
Hold camera securely whilst changing Counterbalance, Pan
Drag or Tilt Drag settings.
Hold the camera securely whilst using the WEDGE PLATE
RELEASE LEVER.
Remove camera whilst tightening / loosening the MITCHELL
CASTLE NUT.
