A complete Parts List is available at www.MillerWelds.com
OM-275099 Page 16
!
Do not move or operate
unit where it could tip.
!
Installation must meet all
National and Local Codes
− have only qualified
persons make this
installation.
!
Do not use power cord to
lift or carry welding power
source.
!
Special installation may be
required where gasoline or
volatile liquids are present
− see NEC Article 511 or
CEC Section 20.
The Auto-Line circuitry in this
unit automatically links the
power source to the primary
voltage being applied, either
120 or 240 VAC.
NOTICE − Do Not modify the
power cord. The power cord
plugs will work with standard NE-
MA receptacles. Use only the
power cords supplied with this
unit. Modifying the power cord(s)
and/or plugs, or using cords not
intended for use with this product
will void warranty.
For 120 volts AC input power, a
15 or 20 ampere individual
branch circuit protected by
time-delay
fuses or circuit
breaker is required. For 240 volts
AC input power, see Section 5-5.
1
Power Cord 120 VAC
120 VAC cord with NEMA type 5
-15P plug and SDG plug.
2
Plug - SDG
3
Plug - NEMA Type 5 - 15P
4
Receptacle - SDG
5
Receptacle - NEMA Type
5-15R
6
Receptacle - NEMA Type 6
- 20R
Connect plug (3) to receptacle (5
or 6).
Ref. 803351-D
5-4.
Connecting 120 VAC Input Power
2
1
3
4
5
6
Summary of Contents for Maxstar 161 S
Page 21: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 17 Notes...
Page 40: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 36 Notes...
Page 41: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 37 Notes...
Page 42: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 38 Notes...
