A complete Parts List is available at www.MillerWelds.com
OM-275099 Page 23
6-3.
Process Selection (STH Model Only)
1
Process Selector Button
Use control to select required
welding process. Press Button un-
til light (LED) for desired process is
illuminated.
2
TIG Impulse Start
When selected, an impulse HF arc
starting method is activated (see
Section 6-5).
3
Lift-Arc
Start
When selected, a TIG arc starting
method in which the electrode
must come in contact with the
workpiece to initiate an arc is acti-
vated (see Section 6-5).
4
Stick (SMAW)
When selected, Adaptive Hot
Start, Stick Stuck and DIG circuitry
are energized.
5
Stick 6010 (SMAW)
When selected, Adaptive Hot Start
,Stick Stuck, and DIG circuitry are
energized. Parameters are opti-
mized to run a 6010 Stick elec-
trode.
1
Press
Press
Press
2
=Light Off
=Light On
3
4
Press
5
6-4.
Process Selection (S Model Only)
1
Process Selector Button
Use control to select required welding
process. Press Button until LED for
desired process is illuminated.
2
Stick (SMAW)
When selected, Adaptive Hot Start
,Stick Stuck, and DIG circuitry are en-
ergized.
3
Stick 6010 (SMAW)
When selected, Adaptive Hot Start
,Stick Stuck, and DIG circuitry are en-
ergized. Parameters are optimized to
run a 6010 Stick electrode.
=Light Off
=Light On
1
Press
1
Press
2
3
Summary of Contents for Maxstar 161 S
Page 21: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 17 Notes...
Page 40: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 36 Notes...
Page 41: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 37 Notes...
Page 42: ...A complete Parts List is available at www MillerWelds com OM 275099 Page 38 Notes...
