OM-279248 Page 26
6-3. Power Switch
1
Power Switch
(Located on rear of feeder)
281841-A
1
6-4. Jog/Purge
281841-A
2
3
1
1
Jog/Purge Switch
Pressing the top portion of switch
enables wire feeder to feed wire
without energizing weld output or
gas valve.
Pressing bottom portion of switch
enables gas valve to purge gas
lines.
2
Wire Speed Control
Wire speed can be adjusted with
the Wire Speed control when the
unit is jogging wire. The unit dis-
plays wire speed while the unit is
being jogged.
3
Gun Trigger Receptacle
The wire feeder can also be jogged
by using the gun trigger. However,
the weld output is energized for 3
seconds. If the welding arc does
not initiate in 3 seconds after the
gun trigger is activated the unit will
perform a jog operation for a maxi-
mum of one minute. If the gun trig-
ger is still activated after one
minute, the jog operation is termi-
nated to prevent complete despool-
ing of the wire, as in the case of a
damaged gun.
.
The unit displays HELP HELD
to inform operator to release
gun trigger or Jog switch.
