OM-279248 Page 21
5-11. Installing Wire Guides And Drive Rolls
Ref. 281467-C
Installing Wire Guides
1
Inlet Wire Guide
2
Intermediate Wire Guide
3
Upper Drive Roll Carrier
4
Drive Roll Pressure Adjustment
Knob
5
Wire Guide Securing Button
Open upper drive roll carriers by grasping
drive roll pressure adjustment knob and
pull out and down. Carrier will spring open.
Repeat for other carrier.
Insert inlet wire guide into wire entry as
shown. Push into place to secure. Repeat
procedure for intermediate guide.
To remove wire guides, push on wire guide
securing button and remove guide.
Installing Drive Rolls
6
Drive Roll Carrier
7
Drive Roll Retaining Nut
8
Drive Roll
With upper drive roll carriers open, slide
drive roll onto carrier. Rotate drive roll re-
taining nut one click to secure in place. Re-
peat procedure for remaining drive rolls.
To remove drive rolls reverse procedure.
Aligning Wire Guide And Drive Rolls
Self-aligning drive rolls do not require any
manual adjustment.
Cleaning Drive Rolls
Remove drive rolls, and clean grooves
using a wire brush.
Close drive assembly cover.
4
8
2
1
6
3
5
7
6
4
