Miller Gold Seal 160 i, Owner'S Manual

Page: 9 / 28

OM-189 116 Page 5
SECTION 2 – INSTALLATION
2-1. Specifications
Rated Welding Output
Amp
Range DC
Maximum
Open-Circuit
Voltage DC
IP Rating
Amperes Input at
Rated Load Output,
50/60 Hz, Single-Phase
KVA Weight
Voltage DC
230 V 240 V
160 A @ 16.4 Volts DC,
60% Duty Cycle
5 – 160 90 IP22 18 17 4
33 lb
(15 kg)
Dimensions:
Height: 10-3/4 in (270 mm); Width: 9-1/8 in (230 mm); Length: 15-3/4 in (400 mm)
2-2. Duty Cycle And Overheating
6 Minutes Welding 4 Minutes Resting
Duty Cycle is percentage of 10 min-
utes that unit can weld at rated load
without overheating.
If unit overheats, thermostat(s)
opens, output stops, and cooling
fan runs. Wait fifteen minutes for
unit to cool. Reduce amperage or
duty cycle before welding.
Y
Exceeding duty cycle can
damage unit and void
warranty.
Overheating
0
15
A
OR
Reduce Duty Cycle
Minutes
duty1 4/95
60% Duty Cycle At 150 Amperes