Miller DYNASTY DX, Technical Manual

Page: 42 / 80

TM-357 Page 40 Dynasty DX
ST-802 035
Y
Significant DC voltage can
remain on capacitors after
unit is Off. Always check ca-
pacitors as shown to be sure
they have discharged before
working on unit.
Turn Off welding power source and
disconnect input power.
Remove case.
1 Input Capacitor C3
2 Input Capacitor C4
3 Voltmeter
Check input capacitors as shown.
Measure the dc voltage across the
positive (+) and negative (–)
terminals until voltage drops to near
0 (zero) volts.
Proceed with job inside unit.
Reinstall case when finished.
2
Tools Needed:
5/16 in
3
7-5. Measuring Input Capacitor Voltage
1
3