Miller DYNASTY DX, Technical Manual

Page: 41 / 80

TM-357 Page 39 Dynasty DX
7-4. Voltmeter/Ammeter Help Displays
.
All directions are in reference to the
front of the unit. All circuitry referred to
is located inside the unit.
1 Help 0 Display
Indicates a short in the thermal protection
circuitry located on the left side of the unit.
Contact a Factory Authorized Service
Agent if this display is shown.
2 Help 1 Display
Indicates a malfunction in the primary pow-
er circuit. Contact a Factory Authorized
Service Agent if this display is shown.
3 Help 2 Display
Indicates an open in the thermal protection
circuitry located on the left side of the unit.
Contact a Factory Authorized Service
Agent if this display is shown.
4 Help 3 Display
Indicates the left side of the unit has over-
heated. The unit has shut down to allow the
fan to cool it (see Section 2-2). Operation
will continue when the unit has cooled.
5
Help 4 Display
Indicates an open in the thermal protection
circuitry located on the right side of the unit.
Contact a Factory Authorized Service
Agent if this display is shown.
6
Help 5 Display
Indicates the right side of the unit has over-
heated. The unit has shut down to allow the
fan to cool it (see Section 2-2). Operation
will continue when the unit has cooled.
7
Help 6 Display
Indicates that the input voltage is too low
and the unit has automatically shut down.
Operation will continue when the voltage is
within the operating range (
±
15%). Have an
electrician check the input voltage if this dis-
play is shown.
8
Help 7 Display
Indicates that the input voltage is too high
and the unit has automatically shut down.
Operation will continue when the voltage is
within the operating range (
±
15%). Have an
electrician check the input voltage if this dis-
play is shown.
9 Help 8 Display
Indicates a malfunction in the secondary
power circuit of the unit. Contact a Factory
Authorized Service Agent if this display is
shown.
10 Help 9 Display
Indicates a short in the thermal protection
circuitry located on the right side of the unit.
Contact a Factory Authorized Service
Agent if this display is shown.
11 Help 10 Display
Indicates gun trigger is depressed. Release
trigger to continue.
12 Help 12 Display
Indicates an improper set-up. Check front
panel.
2
A V
3
A V
4
A V
HE.L P–1
HE.L P–2
HE.L P–3
5
A V
HE.L P–4
6
A V
HE.L P–5
7
A V
HE.L P–6
8
A V
HE.L P–7
9
A V
HE.L P–8
1
V
HE.L P–0
10
A V
HE.L P–9
11
A V
HE.L P–10
A
12
A V
HE.L P–12