6/96
OPTIONS AND ACCESSORIES
BATTERY CHARGER
(#043 499 Factory)
Built-in system for industrial
battery charging. Charges 12 and
24 volt batteries while not welding.
STAINLESS STEEL KIT
(#043 051)
Stainless steel cover and side
panels for added protection and
appearance.
LP GAS CONVERSION KIT
(#043 050 Factory)
(#043 065 Field)
Consists of calibrated LP gas
carburetor and LP gas converter.
Field kit includes mounting
hardware and complete
instructions. Does not include tank,
bracket, or hose from tank to
converter. System is liquid
withdrawal type. Operation on LP
gas reduces rated output by 15%.
LP TANK MOUNTING BRACKET
(#043 013 Field only)
Includes brackets and clamps to
mount the tank and hose with
fittings to converter. For 33 or 43 lb
tanks only.
FA–7.5 FLAME ARRESTOR
FUEL CAP (Gasoline Red)
(#042 632 Field only)
Lockable for added protection.
FUEL GAUGE
(#165 816 Field only)
Handy and convenient accessory
designed for the 8.5 gal. fuel tank.
STARTING AID KIT
(#043 377 Field only)
Glow-plug type, cold weather
diesel starting aid.
SPARK ARRESTOR
(#043 241 Field only)
Mandatory when operating on
California grasslands, brush, or
forest-covered land, and all
National Forests. For other areas,
check your state and local laws.
GFCI PANEL MOUNT KIT
(#043 037 Factory)
(#043 380 Field)
Ground Fault Circuit Interrupters
are required on some construction
sites. Kit contains two
easy-to-install GFCI 120 VAC
duplex receptacles. (240 VAC
GFCI receptacle not required).
FULL KVA PLUG KIT
(#119 172 Field only)
240 VAC, 50 Amp plug (NEMA
14-50 P) to fit full KVA Receptacle.
HIGH ALTITUDE MODIFICATION
Not available from MILLER
Electric. Please contact your local
Onan Dealer or Distributor.
NO. 2WA WELDING
ACCESSORY PACKAGE
(#040 039)
Consists of 35 ft. (10.7 m) No. 2
electrode cable with insulated
electrode holder and lug, 30 ft. (9.1
m) No. 2 work cable with work
clamp and lug, welding helmet,
and wire scratch brush.
CC–1 SERIES CANVAS COVERS
CC-1A (#040 252) Blue
CC–1C (#042 360) Generic
Attractive, waterproof canvas
covers resists stains and mildew,
and protect the finish of your
welder. Blue cover has MILLER
logo and name across side.
VERSATILE HAND RUNNING
GEAR WITH OPTIONS
No. 27 Running Gear has
adjustable axle and choice of
handles to match your job. Sturdy
four-wheel design. Standard
handle designed for use on
smooth surfaces and where
compact package is needed.
Change axle location and use
extended handle to create
wheel-barrow-style unit. Replaces
No. 4B, No. 25, CR-4B running
gear used on previous Bobcat
model. Protective cover can be
used without modification.
NO. 27 HAND RUNNING GEAR
(#043 014)
Rugged, lightweight design
provides maximum
maneuverability. Comes with
standard handle, two large
480/400 x 8 pneumatic tires, two 5
in rubber swivel casters, adjustable
axle and easy-to-read instructions.
NO. 4B RUNNING GEAR
(#041 930)
Two rear wheels with 480/400 x 8
pneumatic tires. Two 8 in (203
mm) solid-rubber-tired front wheels
and 30 in (762 mm) towing handle.
CYLINDER RACK
(#043 040)
Designed for use with No. 4B or
No. 27 RG. Consists of base tray
with bottle bracket, and vertical
support rack with safety chain.
EXTENDED HANDLE
(#043 047)
Easy-to-install tubular steel
wheel-barrow-style handle makes
No. 27 RG perfect for construction
sites or rough shop floors.
Note: Do not use with LP Tank or
Cylinder Rack option.
CABLE HOLDER
(#043 046)
The saddle-bag-style cable holder
is perfect match to No. 27 RG.
Convenient wrap-around storage
of coiled cable for transportation.
Note: For best results do not weld when
cable is coiled!
GTAW (TIG) WELDING
HF–251 Series
High-Frequency Arc Starter and
Stabilizer
HF-251D-1 115 Volt
(#042 388)
A portable 250 Amp unit for 50, 60,
and 100 Hz input.
GMAW/FCAW WELDING
S–32P SERIES COMPACT,
PORTABLE WIRE FEEDER
Lit. Index No. M/6.26
For .023 – 5/64 in. (0.6 – 2.0 mm)
hard and flux cored wire.
SPOOLMATIC
30A
(1 lb. Spool Gun)
(#130 831)
Extend the weld process range by
adding a handy portable system
for small wire GMAW. Rated 200
Amps at 100% duty cycle and has
30 ft. (9.1 m) cable assembly.
WC-115 and WC-115A also
required. (See below.)
