OM-281136 Page 42
7-7. Saving Data To USB Drive
Figure 7-13. USB Menu Screen
1. Insert a USB drive into the USB receptacle on the left side of the ArcReach Heater. The USB drive is automatically detected and a menu is displayed.
2. Press
[Up/Down Arrows]
to highlight Save Temperature Data and press
[Select]
.
Figure 7-14. Save Temperature Data Screen
3. Follow these steps to select each file to save:
To select individual files:
A. Use the
[Up/Down Arrows]
to highlight a desired data file.
B. Press
[Select]
to select it for saving (the bullet is filled to show it will be saved).
C. Repeat for all desired files.
To select all files:
A. Press
[Select ALL]
.
Press
[Save]
button to save all selected files.
