Instruction Manual
Page 11
CHAPTER 5
DEFINITION OF CONTROLS
6.0
Operation
NOTE: Before starting up the machine, please check it carefully and guarantee that there are
no foreign objects under the welding area. Be sure the surrounding area of the machine is
free of flammable debris. Only authorized persons are permitted to use machine.
Start Up
1. Connect the power cord to the appropriate power supply.
2. Connect air to the appropriate air supply and turn the air supply ball valve to the OPEN
position.
3. Turn the power disconnect to the ON position. This will power up the machine and the
heat system.
4. Make sure the emergency stop button is released.
5. Depress the reset button. Depressing the reset button turns ON the control system of
the machine.
6. Assuming the machine adjustments and control settings are to the desired point, the
machine is ready for use.
Shut Down:
1. Turn the power disconnect to the OFF position. This will power down the machine and
the heat system.
2. Turn the air supply ball valve to the OFF position.