Miller Electric Millermatic 212 Auto-Set, Owner'S Manual

Page: 48 / 52

OM-238 118 Page 44
SECTION 9 − PARTS LIST
9-1. Drive Roll And Wire Guide Kits
.
Base selection of drive rolls upon the following recommended usages:
1 V-Grooved rolls for hard wire (solid steel and metal cored).
2 U-Grooved rolls for soft and soft shelled cored wires (aluminum).
3 U-Cogged rolls for extremely soft shelled wires (usually hard surfacing types).
4 V-Knurled rolls for hard shelled cored wires (flux cored).
5 Drive roll types may be mixed to suit particular requirements (example: V-Knurled roll in combination
with U-Grooved).
Ref. S-0026-B/7-91
Wire Diameter
Fraction Decimal Metric
.030/.035 in.
.030 in.
.035 in.
.045 in.
.030/.035 in.
.030 in.
.035 in.
.045 in.
0.8/0.9 mm
0.8 mm
0.9 mm
1.2 mm
Kit No.
204 579
079 594
079 595
079 596
Drive Roll
Part No. Type
203 526
053 695
053 700
053 697
V-Grooved
V-Grooved
V-Grooved
V-Grooved
Inlet
056 192
056 192
056 192
056 193
Wire Guide
.023/.025 in. .023/.025 in 0.6 mm 087 131 087 130 V-Grooved 056 192
.
A complete Parts List is available at www.MillerWelds.com