Miller Electric M-10 Gun, Owner'S Manual

Page: 18 / 52

OM-1328 Page 14
4-3. Process/Polarity Table
Process Polarity
Cable Connections
Process Polarity
Cable To Gun Cable To Work
GMAW − Solid wire with shield-
ing gas DCEP − Reverse polarity Connect to positive (+) out-
put terminal Connect to negative (−) output
terminal
FCAW − Self-shielding wire −
no shielding gas DCEN − Straight Polarity Connect to negative (−)
output terminal Connect to positive (+) output
terminal
4-4. Changing Polarity
1 Lead Connections For Direct
Current Electrode Positive
(DCEP)
2 Lead Connections For Direct
Current Electrode Negative
(DCEN)
3 Insulating Boot
Always read and follow wire
manufacturer’s recommended po-
larity, and see Section 4-3.
Be sure insulating boot is installed
on Negative (−) terminal.
Close door.
Ref. 220 579-A / Ref 803 811
1
2
4-5. Internal Shielding Gas Supply
1 Internal Shielding Gas Bottle
The internal shielding gas bottle is
for CO
2
gas only.
2 Pressure Gauge
3 Regulator
4 Internal/External Transfer
Switch
The Internal/External Transfer
switch allows changing between
the internal or external shielding
gas supply.
Place switch in the Internal Gas
Bottle position.
.
Exposing the gas cylinder to
temperatures in excess of
130
5
F (54
5
C) will cause the
pressure relief valve to
activate, resulting in the loss of
shielding gas.
S
Do NOT expose gas
cylinders to direct sunlight.
S
Do NOT store gas
cylinders in black storage
bag on the side of the unit.
S
Do NOT operate or store
the unit in direct sunlight.
S
Do NOT store gas
cylinders in a hot
automobile.
Ref. 803 811-E
.
If a welding arc is not established
within one second, the gas
solenoid turns off to conserve
shielding gas.
1
4
2 3