.
A complete Parts List is available at www.MillerWelds.com
OM-234 163 Page 29
6-4. Wrapper Removal/Installation
805 209-A
Tools Needed:
!
Turn off power, and
disconnect input power plug
from receptacle or turn off
and lockout/tagout line dis-
connect device before
working on unit.
!
Significant DC voltage can
remain on capacitors after
unit is Off. Check to see that
front panel lights (LEDs) have
stopped flashing and are off
before removing wrapper.
1
Wrapper
2
Front Bezel
3
Rear Bezel
4
Torx Screw (Fine Thread)
Remove 13 screws from wrapper,
and front and rear bezels as shown.
Spread open tops of front and rear
bezels.
5
Consumables Storage
Compartment Opening
Be sure that opening clears the
storage compartment. Lift wrapper
off unit.
.
When installing wrapper, front
and rear wrapper flanges must
be on outside of front and rear
portion of metal chassis.
Torx 25
1
4
1
1
2
3
2
3
5
