OM-4409 Page 40
8-3. Battery Charge Cable Connections
!
Stop engine.
!
Do not charge or jump start a battery
which has loose terminals or one
showing damage such as a cracked
case or cover.
!
Have only qualified persons do bat-
tery charging work.
!
Keep cables away from moving
parts.
!
Do not use damaged cables.
!
Be sure charger output voltage
matches battery voltage.
!
Read BCI Battery Service Manual
before charging or jump starting.
Before connecting to battery, place
Output Selector switch in position
matching voltage of battery being
charged.
1
Battery
2
Battery Charging Cables
For battery charging, use less than 20 feet
(6.1 m) of AWG #1 or larger cable. For jump
starting, use less than 20 feet (6.1 m) of
AWG 2/0 or larger cable.
3
Terminal Lug
Use lugs of proper amperage capacity and
hole size for connecting to charge output
terminals.
Install suitable connectors on remaining
ends of battery cables.
4
Battery Charge Positive (+) Output
Terminal
5
Battery Charge Negative (
−
) Output
Terminal
Connect charging cables to battery
charge output terminals before con-
necting to battery terminals.
Connect Battery Charge Positive (+) cable
to battery positive (+) terminal, and battery
Charge Negative (
−
) cable to battery nega-
tive (
−
) terminal.
803 231-A / 210 156 / Ref. S-0714 / Ref. S-0756
1
3
2
−
+
4
5
Summary of Contents for Big Blue Air Pak
Page 25: ...OM 4409 Page 21 4 13 Manufacturing Rating Label...
Page 47: ...OM 4409 Page 43 SECTION 9 ENGINE GENERATOR MAINTENANCE 9 1 Engine Maintenance Label...
Page 66: ...OM 4409 Page 62 SECTION 13 CIRCUIT DIAGRAM Figure 13 1 Circuit Diagram For Welding Generator...
Page 67: ...OM 4409 Page 63 221 915 C...
