Miller Electric 456 CC, Owner'S Manual

Page: 28 / 44

OM-203 034 Page 24
5-6. Mode Switch Settings For CC/CV Models
.
The SMAW modes provide the Adaptive Hot Start ™ feature, which automatically increases the output amperage at the start of a weld should the
start require it. This eliminates electrode sticking at arc start.
Mode Output Control
Scratch Start TIG (GTAW)
Select: or Amp
Weld:
Lift-Arc Trigger
Hold TIG (GTAW)
Select: or Amp
Requires: Control
TIG (GTAW) With
HF Unit,
Pulsing Device,
Or Remote Control
Select: or Amp
Requires: Control
MIG (GMAW)
Select: or Volt
Requires: Feeder
MIG (GMAW) With
Voltage Sensing
Wire Feeder
Select: or Amp
Weld:
Pulsed MIG
(GMAW-P)
(Requires an
external
pulsing device.)
Select: Volt
Requires: Feeder or Control
Remote
Control SMAW
Select: or Amp
Requires: Control
Panel Control
SMAW
Select: or Amp
Weld