362019
9
Figure 6
Thread Waist Buckle
STEP 2. With both left and right legs in the leg loops, slip your right arm through the right shoulder strap as shown in Figure 3. With your
right arm in the right shoulder strap, repeat this Step for your left arm. The full-body fall arrest harness should now be hanging loosely
about your torso as shown in Figure 4.
STEP 3: Locate the waist belt and waist belt buckle as shown in Figure 1. Wrap the waist belt around your waist as shown in Figure
5. Thread the buckle as shown in Figure 6. Extreme care must be taken to thread the waist buckle as depicted in Figure 6. Tighten
the waist buckle until the waist belt is snug. DO NOT overtighten as this may become very uncomfortable and potentially cut-off your
circulation.
WARNING! DO NOT overtighten the waist belt as this may cut-off circulation and cause an unsafe condition. Failure to follow
these instructions may result in serious injury or death!
STEP 4: With the waist belt comfortably snug, locate the two (2) leg loop buckles as shown in Figure 1. Adjust both leg loop buckles so
the leg loops are positioned snugly in the groin area as shown in Figure 7. Tighten the leg loops so they are snug, however, not overly
tight. Overtightening of the leg loops will restrict circulation to the legs and cause an unsafe condition.
WARNING! DO NOT overtighten the leg loops as this may cut-off circulation and cause an unsafe condition. Failure to follow
these instructions may result in serious injury or death!
STEP 5: With the leg loops tightened to a comfortable fit and the waist belt adjusted snugly, your full-body fall arrest harness shall now
be donned as shown in Figure 8.
1
3
2
4
5
6
Figure 7
Tighten Leg Loops/Positioned
Snugly in Groin Area
Figure 8
Full-Body Fall Arrest Harness Donned
Correctly (Front and Rear Views)
Summary of Contents for L-110-SL
Page 15: ......
Page 21: ...362019 21...
