Millennium Arcade 3000, Instruction Manual

Page: 10 / 116

ENG
-7-
5) Switch on the games console. The starting display of the
ARCADE 3000 should now appear on the TV screen. The
console’s own TFT screen and sound output will remain
switched off.
6) Now operate the console in the usual way.
Important Precaution:
When playing with the television, make sure no one can trip
over the cable!
4 Trouble shooting
The machine will not switch on
Check whether the batteries are installed correctly (pay
attention to the polarity!) and whether the power is sufficient.
If necessary, insert new batteries.
Check whether you have pressed the button properly.
The picture appears abnormal
There can often be electrostatic charges. The result can be a
flickering display, lines through the picture, or distorted
colours.
If this is the case, switch the ARCADE 3000 off and then on
again, or press the RESET button twice. If the problem still
persists, you may need to change the batteries.
The picture loses brightness and contrast
The batteries are spent and must be replaced.
The speaker has a tinny sound
You may have turned the volume up too high. Turn the knob
the other way to reduce it.
No sound comes through the headphones
Check whether the headphone connection really fits the
machine. Is the plug secured properly? If necessary, try
different headphones.
The machine automatically reverts to its initial display
The batteries may be spent and need replacing.